Licensed electricians for Peakhurst and Peakhurst Heights, from fuse box upgrades to EV chargers, with a fixed price before we start.
Peakhurst and Peakhurst Heights sit between Forest Road and the Georges River, a short drive west of our Penshurst base. We work across both suburbs every week, from quick repairs to complete switchboard replacements and rewiring for renovations.
PrimeTime Electrical & Communications is a licensed NSW electrical contractor (Lic. 486625C) and fully insured. We give you a fixed price before any work starts, and installation work comes with a Certificate of Compliance for Electrical Work (CCEW).
Peakhurst is mostly a suburb of free-standing family homes on decent-sized blocks: post-war brick and fibro houses, plus a growing number of knock-down rebuilds and duplexes. Many of the original homes have been extended over the years, and the electrical system hasn't always kept up. We regularly find switchboards with no spare room, old rubber-insulated wiring in the roof space, and circuits overloaded by heaters, pool pumps and home offices that were added long after the house was built.
Down towards Henry Lawson Drive in Peakhurst Heights, the blocks are bigger and often include pools, granny flats, sheds and long driveways. Those extras mean more outdoor power, garden and security lighting, and sometimes a separate sub-board to run a granny flat or workshop safely.
If you're planning a knock-down rebuild in Peakhurst, it pays to involve an electrician early. We can set up temporary builders' power, plan the new mains and meter position, and size the switchboard for solar, a battery and EV charging from day one. Getting that right at the start costs far less than adding capacity later.
Peakhurst is about eight minutes from our Penshurst base along Forest Road, so same-day and next-day bookings are usually easy to arrange. If something looks unsafe, such as sparking, smoke, a burning smell or power that won't come back on, call our 24/7 emergency line on 0416 049 923.
Replace old fuse boxes with a modern board and RCD protection on every circuit.
Home and business EV chargers, with a supply and switchboard check first.
Photoelectric and interconnected smoke alarms for homes and rentals.
Pre-purchase, rental and safety inspections with a written report.
Downlights, feature lighting, garden and security lighting.
New power points, rewiring, extensions and renovation fit-offs.
Neat, safe ceiling fan installation, with or without a light.
Authorised Good Guys installer for kitchen appliances.
Tripping circuits, power loss, sparking and urgent repairs.
Yes. We service Peakhurst and Peakhurst Heights (both 2210), including the streets off Forest Road and along Henry Lawson Drive.
Yes. We check your main switchboard and supply first, then run a properly sized cable and, where needed, a separate sub-board with its own safety switches so the new building is protected.
Not always. We check the switchboard's capacity and your supply first. If there's room, the charger can go straight in; if not, we'll quote the upgrade and the charger together.
Yes. We install temporary builders' power, then wire the new home right through to the final fit-off and compliance certificate.